To make a phone call to Pakistan from Australia, you will need to dial the following way:
When dialing to Pakistan, you are recommended to drop the very first digit of the telephone number. This is due to the fact, phone numbering plans in Pakistan use a so called Telephone Trunk Code (Trung Prefix). This is typically the digit ’0‘ (zero) which is usually positioned in front of telephone numbers for calls coming from within the country. On the other hand, this specific digit needs to be left out anytime you are dialing an overseas destination.
Generally there are situations when an overseas telephone call will not proceed through. Quite a few of the explanations are detailed listed below:
Phone area codes in Pakistan are usually often called Numbering Plan Areas (NPAs). It was previously called STD codes in Pakistan.
These kinds of telephone area codes are essential only when dialing from outside the phone code area. But it’s very important when making a phone calls from the mobile phones.
Telephone area codes or city codes in Pakistan commonly indicate regional areas inside Pakistan which are covered by 100s of telephone exchanges.
The phone area code in Pakistan is normally preceded in the dial string by the Pakistan country code or the international access code for Pakistan.
Phone Area codes in Pakistan tend to be quoted with the country access code for Pakistan.
When making an international call from Pakistan, first of all dial the IDD code which is “00”, then the country access code.
Feel free to talk about your viewpoints with the Pakistani Embassy in Canberra, Australia. Whether you are getting a visa for going to Pakistan or notarizing documents or merely just seeking to talk with an individual at the Pakistani consulate in Canberra. Let us know by simply posting it on this site.
Please Be aware: Your feedback are going to be viewed by the public, due to this fact you should not include confidential details.