To make a call to Norway from Australia, a person will have to dial the following way:
Whenever dialling to Norway, you are required to drop the 1st number of the phone number. This is because, phone numbering plans in Norway utilize a so called Telephone Trunk Code (Trung Prefix). This is typically the digit ’0‘ (zero) that is positioned in front of telephone numbers for telephone calls coming from within the country. Nevertheless, this specific digit have to be left out whenever you are dialling an international destination.
Certainly, there are occasions when an international phone call will not proceed through. Quite a few of the causes are explained listed below:
Telephone area codes in Norway are commonly known as Numbering Plan Areas (NPAs). It was previously known as STD codes in Norway.
These types of telephone area codes are necessary only if phoning from outside the telephone code area. But it’s fundamental when making a phone calls from the cell phones.
Telephone area codes or city codes in Norway normally show geographical areas within Norway which are covered by 100s of telephone exchanges.
The phone area code number in Norway is generally preceded in the dial string by the Norway country code or the international access code for Norway.
Telephone Area codes in Norway in many cases are quoted together with the country access code for Norway.
When making an overseas telephone call from Norway, first of all dial the IDD code which is “00”, then the country access code.
Please share your own encounters with the Norwegian Embassy in Canberra, Australia. Whether you’re applying for a visa for visiting Norway or notarizing documents or simply just planning to talk to a person at the Norwegian embassy in Canberra. Let us know simply by submitting it on this page.
Please Remember: Your comments are going to be seen by the general public, because of this do not include confidential information.