To make a telephone call to Mauritius from Australia, you actually will need to dial the following structure:
When phoning to Mauritius, you are expected to drop the 1st digit of the telephone number. This is because, telephone numbering plans in Mauritius use a so called Telephone Trunk Code (Trung Prefix). This is usually the digit ’0‘ (zero) which is usually placed in front of phone numbers for calls originating inside the country. Having said that, this specific digit needs to be left out every time you are dialling an overseas destination.
Generally there are instances when an international phone call may not proceed through. Some of the reasons are explained down below:
Telephone area codes in Mauritius are usually referred to as Numbering Plan Areas (NPAs). It had been previously identified as STD codes in Mauritius.
These telephone area codes are crucial only if dialling from outside the phone code number area. However it is critical when making a telephone calls from the mobile phones.
Telephone area codes or city codes in Mauritius generally indicate geographical areas inside Mauritius which are covered by hundreds of telephone exchanges.
The phone area code in Mauritius is by and large preceded in the dial string by the Mauritius country code or the international access code for Mauritius.
Telephone Area codes in Mauritius tend to be quoted along with the country access code number for Mauritius.
To make an overseas phone call from Mauritius, first dial the IDD code which is “00”, then the country code.
Please voice your own opinions with the Mauritian Embassy in Canberra, Australia. Whether you are getting a visa for visiting Mauritius or notarizing paperwork or simply just planning to talk with someone at the Mauritian visa office in Canberra. Tell us by just posting it here.
Please Be aware: Your comments are going to be seen by the public, for that reason you should never include confidential information.