To make a call to Japan from Australia, you actually will need to dial the following format:
Whenever dialing to Japan, you are expected to drop the 1st digit of the phone number. This is due to the fact, telephone numbering plans in Japan use a so called Telephone Trunk Code (Trung Prefix). This is generally the digit ’0‘ (zero) which is positioned in front of telephone numbers for calls originating within the country. However, this particular digit needs to be left out each time you are dialing an overseas destination.
There are occasions when an international telephone call may not go through. Some of the causes are explained below:
Phone area codes in Japan are generally referred to as Numbering Plan Areas (NPAs). It was formerly referred to as STD codes in Japan.
A lot of these phone area codes are necessary only if calling from outside the telephone code area. But it’s important when making a telephone calls from the mobile phones.
Telephone area codes or city codes in Japan generally show geographical areas inside Japan that are covered by 100s of phone exchanges.
The phone area code number in Japan is normally preceded in the dial string by the Japan country code or the international access code for Japan.
Telephone Area codes in Japan tend to be quoted with the country access code for Japan.
To make an international telephone call from Japan, first dial the IDD code which is “10”, then the country code.
Don’t hesitate to voice your own opinions with the Japanese Embassy in Canberra, Australia. Whether you are applying for a visa for traveling to Japan or notarizing paperwork or simply just trying to talk to someone at the Japanese consulate in Canberra. Tell us simply by posting it here.
Please Remember: Your feedback are going to be viewed by the general public, because of this you should never include confidential information.