To make a call to Iran from Australia, a person will have to dial the following way:
Whenever dialling to Iran, you are required to drop the 1st number of the phone number. This is because, phone numbering plans in Iran utilize a so called Telephone Trunk Code (Trung Prefix). This is typically the digit ’0‘ (zero) that is positioned in front of telephone numbers for telephone calls coming from within the country. Nevertheless, this specific digit have to be left out whenever you are dialling an international destination.
Certainly, there are occasions when an international phone call will not proceed through. Quite a few of the causes are explained listed below:
Telephone area codes in Iran are commonly known as Numbering Plan Areas (NPAs). It was previously known as STD codes in Iran.
These types of telephone area codes are necessary only if phoning from outside the telephone code area. But it’s fundamental when making a phone calls from the cell phones.
Telephone area codes or city codes in Iran normally show geographical areas within Iran which are covered by 100s of telephone exchanges.
The phone area code number in Iran is generally preceded in the dial string by the Iran country code or the international access code for Iran.
Telephone Area codes in Iran in many cases are quoted together with the country access code for Iran.
When making an overseas telephone call from Iran, first of all dial the IDD code which is “00”, then the country access code.
Please share your own encounters with the Iranian Embassy in Canberra, Australia. Whether you’re applying for a visa for visiting Iran or notarizing documents or simply just planning to talk to a person at the Iranian embassy in Canberra. Let us know simply by submitting it on this page.
Please Remember: Your comments are going to be seen by the general public, because of this do not include confidential information.